Vinyl Care & Dust Removal, How to make vinyl sound good?? Options

[ViPER1313]

After reading the thread found here [ http://www.hydrogenaudio.org/forums/index....t=7953&hl=vinyl ] I was blown away by the recording quality of the sandra.mpc sample. How do you get vinyl to sound so dust free and rich? All the vinyl that I have recorded has at least some dust crackling in the background, and some recordings sound extremely harsh (especially in the vocals - almost like clipping except there is no clipping going on.....) Do you use digital correction? Filtering? I use the following equipment -

Marantz TT1060 Turntable w/ unknown cartridge/needle (the cartridge/needle are replacements, less than 6 months old - I have no idea what brand / model they are, but they seem to be of decent quality.)

Marantz PM325 Receiver

SB-Live soundcard fed from phono -> receiver -> line-in (This is not the weak link I am concerned over - I know it has crappy quality recording, but I am worried about the record playback quality itself . I have also tried phono -> line-in directly and was not impressed with the quality at all.)

The cartridge seems to have good frequency response and be of decent quality, but I can not get rid of dust no matter what I try - I have a diskwasher and have tried a 1:5 alcohol/water solution, but the dust persists. Any tips?

[boojum]

What do you think about playing wet? I recall to hear that it may damage the records permanently but increase the quality while playing. Is it true?

My experience with this is to only do it with distilled water. Tap water will contain impurities which add to surface noise, and then you will be obliged to always play it wet. If you can track down an old ESL "Dust Bug" this is quite helpful. The Lenco version of this was also OK, but I always preferred the Dust Bug. YMMV. Soon you will understand completely why CD's are far better. B)