I have a 1520 (XP Home) with a TSSTCorp TSL462D CDR/DVD.
I cannot burn audio cds using burrrn.
Finished processing file #1.
Initializing SPTI ... OK!
ERROR: Cannot open SCSI device 'SPTILOCK:1,0,0':
ERROR: Cannot open SCSI device 'SPTILOCK:1,0,0':
Transport name: ASPI
Transport descr.: Generic transport independent SCSI
Transp. layer ind.: ASPI:
Target specifier: bus,target,lun
Target example: ASPI:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
Transport name: SPTI
Transport descr.: Generic SCSI for Windows NT/2000/XP
Transp. layer ind.: SPTI:
Target specifier: bus,target,lun
Target example: SPTI:1,2,0
SCSI Bus scanning: supported
Open via UNIX device: not supported
ERROR: Please use option '--device bus,id,lun', e.g. --device 0,6,0
ERROR: Cannot setup device SPTILOCK:1,0,0.
Supported SCSI transports for this platform:
Full Version: new dell laptop+can't burrrrn
Have you tried other programs, such as Nero?
There is an updated firmware that was released on 11/28 for the TSST TS-L632H to resolve some compatibility issues between that specific burner and iTunes and other applications. I wonder if this firmware applies to your model as well. Are you sure you don't have the ts-L632H?
QUOTE(incunabula @ Dec 9 2007, 18:25) 
There is an updated firmware that was released on 11/28 for the TSST TS-L632H to resolve some compatibility issues between that specific burner and iTunes and other applications. I wonder if this firmware applies to your model as well. Are you sure you don't have the ts-L632H?
Yes I belive the 632 is a DVDR.
I have thought about trying the firmware for the 632, but am waiting for India, err I mean Dell, to get back to me.
QUOTE(Rain @ Dec 9 2007, 18:02)
Have you tried other programs, such as Nero?
I just burned a Data disc with Deepburner w/o any issues.
QUOTE(nightfishing @ Dec 9 2007, 18:32)
QUOTE(incunabula @ Dec 9 2007, 18:25)
There is an updated firmware that was released on 11/28 for the TSST TS-L632H to resolve some compatibility issues between that specific burner and iTunes and other applications. I wonder if this firmware applies to your model as well. Are you sure you don't have the ts-L632H?
Yes I belive the 632 is a DVDR.
I have thought about trying the firmware for the 632, but am waiting for India, err I mean Dell, to get back to me.
Yeah if you have CDR and the firmware is for the DVDR they are probably two separate issues and the firmware probably won't be hardware agnostic.
OK, I tried the first trick (wnaspi in the burrrn dir) and I end up with this:
Finished processing file #1.
Recommended Album Gain: -6.16 dB Scale: 0.4920
WaveGain Processing completed normally
Initializing ASPI ... OK!
ASPILOCK:1,0,0: SAMSUNG HM320JI Rev: 2SS0
WARNING: Length of toc (04:02:30, 18180 blocks) exceeds capacity of CD-R (00:00:00, 0 blocks).
WARNING: Ignored because of option '--overburn'.
WARNING:
WARNING: Some drives may fail to record this toc.
?: I/O error. : scsi sendcmd: retryable error
CDB: BB 00 FF FF 05 88 00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 20s
ERROR: Cannot set cd speed.
ERROR: Writing speed 8 not supported by device.
(Tried, 16x, 8x, 4x etc)
The TOC stuff makes no sense (It was a single 5 min track.)
Tried trick#3
Initializing ASPI ... OK!
ASPILOCK:1,0,0: SAMSUNG HM320JI Rev: 2SS0
WARNING: Length of toc (07:12:00, 32400 blocks) exceeds capacity of CD-R (00:00:00, 0 blocks).
WARNING: Ignored because of option '--overburn'.
WARNING: Some drives may fail to record this toc.
?: I/O error. : scsi sendcmd: retryable error
CDB: BB 00 FF FF 0B 10 00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 20s
ERROR: Cannot set cd speed.
ERROR: Writing speed 16 not supported by device.
Finished processing file #1.
Recommended Album Gain: -6.16 dB Scale: 0.4920
WaveGain Processing completed normally
Initializing ASPI ... OK!
ASPILOCK:1,0,0: SAMSUNG HM320JI Rev: 2SS0
WARNING: Length of toc (04:02:30, 18180 blocks) exceeds capacity of CD-R (00:00:00, 0 blocks).
WARNING: Ignored because of option '--overburn'.
WARNING:
WARNING: Some drives may fail to record this toc.
?: I/O error. : scsi sendcmd: retryable error
CDB: BB 00 FF FF 05 88 00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 20s
ERROR: Cannot set cd speed.
ERROR: Writing speed 8 not supported by device.
(Tried, 16x, 8x, 4x etc)
The TOC stuff makes no sense (It was a single 5 min track.)
Tried trick#3
Initializing ASPI ... OK!
ASPILOCK:1,0,0: SAMSUNG HM320JI Rev: 2SS0
WARNING: Length of toc (07:12:00, 32400 blocks) exceeds capacity of CD-R (00:00:00, 0 blocks).
WARNING: Ignored because of option '--overburn'.
WARNING: Some drives may fail to record this toc.
?: I/O error. : scsi sendcmd: retryable error
CDB: BB 00 FF FF 0B 10 00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 20s
ERROR: Cannot set cd speed.
ERROR: Writing speed 16 not supported by device.
I wiped out the Burrrn.ini and started over and it is working, now.
Without Wnaspi.dll or the ASPI reg hack.
Only thing I can think of is that I overwrote the ini file with one from my other laptop when I was setting up the new box.
Sorry for wasting everyone's time; the next round is on me.
Without Wnaspi.dll or the ASPI reg hack.
Only thing I can think of is that I overwrote the ini file with one from my other laptop when I was setting up the new box.
Sorry for wasting everyone's time; the next round is on me.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.